the perfect match

Sciospec Solutions for  Electrical Impedance Tomography

Electrical Impedance Tomography (EIT) is an imaging technique that visualizes conductivity or impedance distributions both in 2D and in 3D. Sciospec is partnering with world leading scientists in the field to deliver solutions that enable using EIT both in research and in practical applications.

Apart from our standard instruments for easy entry into the world of EIT we also offer fully customized EIT products as well as application-specific OEM solutions. Build on Sciospec´s flexible technology plattform, scalabilty is at the heart of all our instruments: Channel counts of up to 256 are available in standard configurations and we even have reference system designs with a lot more than that.

Over the years we have realized applications ranging from the classical medical (lung ventilation monitoring and electrode positioning problems) over industrial applications (pipe system monitoring and contamination tracking) to state of the art chip based EIT for biosensing applications.

Let's begin with Sciospec's EIT lab instruments

Sciospec's EIT systems (EIT16/32/64/128+) are specifically designed for measurements for electrical impedance tomography. True parallel measurements and tightly synchronized switching allows for fast frame rates. No matter what channel count you decide to go with, you'll benefit from:

  • dual role electrode connections serving both as voltage measurement and current injection ports
  • tightly synchronized data acquisition block for truly simultaneous sampling of all channels
  • injection switch matrix for selection of any combination of 2 channels for positive and negative injection ports
  • switch matrix either based on ultra-low leakage reed relays or high speed semicondutor switches
  • Sciospec SineFit algorithm for fast and precise signal extraction
  • broad frequency range (e.g. 100 Hz ... 1 MHz)
  • spectral measurements with frequency sweeps with up to 128 frequencies
  • current excitation from 100 nA ... 10 mA peak amplitude
  • frame rates up to 100 fps
  • software with ready to go imaging algorithms
  • fully customizable - just ask us

For easy entry a software provides EIT image reconstruction functionalities for time- and frequency-difference imaging. Alternatively you can just use the MATLAB code and import your data to EIDORS or write your own image reconstruction and import that to our software.

add powerful options as you need them

  • frontpanel connectors: BNC, SMA, MCX, DSUB, MDR, custom
  • IOport digital interface connector for external sensors and other hardware
  • wireless interfaces
  • medical grade modifications
    • power supply
    • enclosure modification
    • isolated USB-Port
    • AC coupling frontend
    • isolated IOport
  • temperature controller module
  • customized current and voltage ranges
  • Battery operation
  • and many more

Choose from countless EIT accessories

We offer different phantom tanks

  • standard EIT16 phantom tank: 1 ring with 16 electrodes
  • standard EIT32 phantom tank: 1 ring with 32 electrodes 
  • EIT phantom tank 16x2: 2 rings with 16 electrodes each
  • EIT phantom tank 32x2: 2 rings with 32 electrodes each

But also can we built customer-specific designs

  • individual electrode count
  • individual electrode arrangements (e.g. multiple levels or grids)
  • individual tank layout, diameter & height

Phantoms tanks can be selected as an accessory for our EIT devices

 

  • connector types
    • banana plug
    • crododil clip
    • custom
  • cable lenghts 
    • 0,5 m
    • 1 m
    • 1,5 m
    • custom lenghts

Cable sets can be selected as an accessory for our EIT devices

 

  • extension module for the Sciospec EIT16 system
  • multiplexer to connect sensors in slide-in format
  • 48 channels: 3 banks with 16 channels each (only three measurement runs for all 48 channels) 
  • sensor carriers available at Sciospec

The EIT SlideChip adapter and the SlideChip carriers can be selected as an accessory for our EIT16 device

With multichannel scalability as one of our core competences - EIT is a perfect match for our technology platform. Not only do we provide our expertise in instrumentation design, but we also have expert data scientists with long time experience in imaging algorithms for EIT embedded in our development team.

And how about OEM?

As all our platform technology EIT is available as OEM, too. Our plaform allows for cost-efficient customization and easy integration of our technology to customers' products. Safe time to market by getting the best impedance technology turn-key ready by the leading impedance OEM company. A portable device for mobile health or a massive multichannel platform for a screening application - everything is possible. You also need a graphical user interface? Okay. You're going for a medical device? No problem. Just get in touch with us!

For questions or comments please leave us a message

TOP

Our website uses cookies and thereby collects information about your visit to improve our website (by analyzing), show you Social Media content and relevant advertisements. Please see our cookies page for furher details or agree by clicking the 'Accept' button.

Cookie settings

Below you can choose which kind of cookies you allow on this website. Click on the "Save cookie settings" button to apply your choice.

FunctionalOur website uses functional cookies. These cookies are necessary to let our website work.

AnalyticalOur website uses analytical cookies to make it possible to analyze our website and optimize for the purpose of a.o. the usability.

Social mediaOur website places social media cookies to show you 3rd party content like YouTube and FaceBook. These cookies may track your personal data.

AdvertisingOur website places advertising cookies to show you 3rd party advertisements based on your interests. These cookies may track your personal data.

OtherOur website places 3rd party cookies from other 3rd party services which aren't Analytical, Social media or Advertising.